 This task shows you how to customize V4 / V5 DRAW Data settings, that are divided in five sections: Geometry import, Dimension conversion mode, Explode Mode, Blink element, Generative view style. Geometry import
When importing geometry, you can decide that you do or do not create centers and end points.Dimension conversion mode
When converting dimensions, the resulting dimensions can or cannot be edited (modified).Explode mode
When importing a ditto (or component), this ditto is automatically exploded. As result each element in that ditto can be modified separately. By default, you can convert the V4 Symbole into Ditto in CATIA V5, but when this setting is activated you can keep the former mode, Explode symbole mode. Blink element
When this setting is activated, you obtain a red element in CATIA V5 corresponding to the V4 Blink element. If you do not activate this option, the migrated Blink element is displayed in highlight.Generative view style This setting specifies the generative view style that should be used when migrating AUXVIEW2 views from V4 to V5. select an XML file from the list. The generative view style parameters defined in this file will be used for the migration.
If this setting is unavailable, you need to uncheck the Prevent generative view style creation setting from Tools -> Options -> Mechanical Design -> Drafting -> Administration tab.
For more information about generative view styles, refer to the Generative Drafting User's Guide. |
