|
|
ZSY、ZLY齿面减速机 |
一、减速机适用范围如下：
1、高速轴转不大于1500转/分。
2、齿轮传动圆周速度不大于20米/秒。
3、工作环境温度为-40-45℃，如果低于0℃，启动前润滑油应预热至0℃以上，本减速机可用于正反两个方向运转。
二、其特点如下：
1.齿轮采用高强度低碳合金钢经渗碳淬火而成，齿面硬度达HRC58-62，齿轮均采用数控磨齿工艺，精度高，接触性好。
2.传动率高：单级大于96.5%，双级大于93%，三级大于90%。
3.运转平稳，噪音低。
4.体积小，重量轻，使用寿命长，承载能力高。
5.易于拆检，易于安装。
三、减速机的型号
ZDY表示单级传动圆柱齿轮减速机；
ZLY表示两级传动圆柱齿轮减速机；
ZSY表示三级传动圆柱齿轮减速机.
The products are based on national standards ZBJ19004 production outside Evolute line helical gear reducer. The product is widely used in metallurgical, mining, lifting, transportation, cement, construction, petrochemicals, textiles, dyeing, pharmaceutical and other fields. One, reducer application is as follows : 1, high-speed shaft to transfer not more than 1,500 / min. 2, Gear peripheral speed of not more than 20 m / s. 3, and the working environment temperature -40-45 ° C, below 0 ° C, before the commencement of lubricants should preheat to 0 ° C and above, this slowdown can be used for both positive and negative direction of operation. 2, characterized as follows : 1. Gear used high-intensity low-carbon steel by carburization which, tooth surface hardness HRC58-62, have adopted CNC gear tooth grinding technology, high precision, good contacts. 2. Transmission rate : single-stage greater than 96.5%, a two-stage over 93%, greater than 90% 3. 3. Smooth operation, low noise. 4. Small size, light weight, long service life and high loading capacity. 5. Demolition Frederick easy, easy installation. 3, reducer models ZDY said single-cylinder drive gear; ZLY said two cylindrical gear transmission; ZSY said three transmission Gear reducer. |
|
|
|
| |
|
|
|
|
